Commissioning the device
4.3 Parameter assignment for Comfort Panel
Comfort Panels
80 Operating Instructions, 07/2017, A5E36770603-AB
Operating the Control Panel
You can operate the Control Panel using the touch screen. The following steps give a
general description of how to operate a function.
● The current project has been closed.
● The Start Center is displayed.
1. Open the Control Panel using the "Settings" button.
2. Double-click an icon. The corresponding dialog is displayed.
3. Select a tab.
4. Make the desired settings. When you navigate to an entry field, the screen keyboard
opens.
5. Your settings are applied with the button.
To cancel the entry, press the button. The dialog closes.
6. To close the Control Panel, use the button.
The Start Center is displayed.
Configuring the screen keyboard (Page 85)
Display types for the screen keyboard
The screen keyboard is used for entering alphanumeric, numeric and special characters. As
soon as you touch a text box, a numeric or alphanumeric screen keyboard is displayed,
depending on the type of the text box.
You can also open the screen keyboard by selecting the icon in the status bar. The icon is
shown in the figure in section "Overview of functions (Page 78)".
The procedure for setting the screen keyboard is described in the section
"Configuring the screen keyboard (Page 85)".
To Next Page
Loading...
