Siemens SIMATIC NET IE FC RJ45 Plug 4x2 CAT 6A - Page 19

Frei verwendbar IE FC RJ45 Plug 4x2 CAT 6A
A5E34280610-AA, 08/20
19
2. Measure approximately 10 cm of cable.
3. Place the cable in the stripping tool. Make sure that a length of approximately 10 cm is stripped.
4. Clamp the cable with the stripping tool by pressing the lever completely forward.
The 4-pair cables shall
be clamped only to the
second to last position.