Siemens SIMATIC NET IE FC RJ45 Plug 4x2 CAT 6A - Assembly Instructions; Assembly Overview; Required Tools

Frei verwendbar IE FC RJ45 Plug 4x2 CAT 6A
A5E34280610-AA, 08/20
18
Table 1-4 Suitable for the following cable types:
Order number
Cable type
6XV1878-2A (24 AWG)
IE FC standard cable 4x2
6XV1878-2B (24 AWG)
IE FC flexible cable 4x2
6XV1878-2T
1)
IE TP TRAIN Cable 4x2 CAT7(AWG 24)
6XV1878-2G
2)
IE FC TP Ground Cable 4x2 CAT6
A
(AWG 24)
and other four-wire IE FC cables (22 AWG) except for: IE FC standard cable 4x2
with order number 6XV1870-2E
1)
The use of stripping tool is not permitted for stripping.
2)
If the outer coating is removed the stripping tool (6GK1901-1GA00) can be
used.
Table 1-5 Stripping tool
Order number
Name
6GK1901-1GB00
IE FC BLADE CASSETTES, 5 MM
6GK1901-1GA00
IE FC IE FC STRIPPING TOOL
2 Assembly
Follow these steps to assemble the IE FC RJ45 4x2 CAT 6A:
1. In the stripping tool (6GK1901-1GA00), use the green knife cassette (6GK1901-1GB01) with 5.1 mm knife distance.