Approvals
CP 1543-1
84 Operating Instructions, 12/2019, C79000-G8976-C289-08
c(UL)us
Applied standards:
● Underwriters Laboratories, Inc.: UL 61010-1 (Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use - Part 1: General
Requirements)
● IEC/UL 61010-2-201 (Safety requirements for electrical equipment for measurement,
control and laboratory use. Particular requirements for control equipment)
● Canadian Standards Association: CSA C22.2 No. 142 (Process Control Equipment)
Report / UL file: E 85972 (NRAG, NRAG7)
cULus Hazardous (Classified) Locations
Underwriters Laboratories, Inc.: cULus IND. CONT. EQ. FOR HAZ. LOC.
Applied standards:
● ANSI ISA 12.12.01
● CSA C22.2 No. 213-M1987
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T3...T6
● Cl. 1, Zone 2, GP. IIC T3...T6
Ta: Refer to the temperature class on the type plate of the CP
Report / UL file: E223122 (NRAG, NRAG7)
Note the conditions for the safe deployment of the product according to the section Notes on
use in hazardous areas according to UL HazLoc (Page 27).
-PLUG memory: The C-PLUG memory module may only be inserted or
removed when the power is off.
CSA
CSA Certification Mark Canadian Standard Association (CSA) nach Standard C 22.2 No.
142:
● Certification Record 063533–C-000
FM
Factory Mutual Approval Standards:
● Class 3600
● Class 3611
To Next Page
Loading...
Need help?
General
