EasyManua.ls Logo

Siemens SIMATIC NET SCALANCE W700 Series

Siemens SIMATIC NET SCALANCE W700 Series
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Approvals for SCALANCE W780 / W740 802.11n
1.2 National approvals
Approvals SCALANCE W700 802.11n
20 Reference Manual, 11/2014, C79000-G8976-C392-01
NCC Warning Statement (Taiwan)
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the
power, or change the characteristics and functions of the original design of the certified lower
power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the navigation
safety nor interfere a legal communication, if an interference is found, the service will be
suspended until improvement is made and the interference no longer exists.
1.2
National approvals
The following table lists the countries in which the SCALANCE W700 product is approved.
The diamond symbol (♦) identifies all countries for which there was no approval at the time
these operating instructions were written.
The current status of the approvals can be found on the Internet at the following address:
http://www.siemens.com/funkzulassungen
Column
Meaning
Country
Country
Mode
IEEE 802.11 standard and the TPC and / or DFS functionality, where required
CH
Channel
MHz Frequency
PWR (EIRP)
Maximum permitted effective isotropic radiated power
Use Permitted use indoors and / or outdoors

Related product manuals