To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE W1780 and is the answer not in the manual?
General| Product type designation | SCALANCE W1780 |
|---|---|
| Type | Wireless Access Point |
| Wireless standard | IEEE 802.11a/b/g/n/ac |
| Number of radio interfaces | 2 |
| Operating frequency | 2.4 GHz / 5 GHz |
| Antenna connection | RP-SMA |
| Ethernet ports | 2 x 10/100/1000 Mbps |
| Power consumption | max. 12 W |
| Protection class IP | IP65 |
| Antenna | External |
| PoE | IEEE 802.3af/at |
| Supply voltage | 24 V DC |
| Security | WPA3, WPA2, WPA, 802.1X |
| Operating temperature | -40 °C to +70 °C |
| Mounting type | Wall or pole mounting |
Details the scope and orientation of the configuration manual.
Explains different network setups using access points like standalone, wired access, WDS.
Details the Ethernet and WLAN interface properties, IEEE standards supported, and security features.
Explains the IEEE 802.11ac standard, its differences from 802.11n, and MIMO technology.
Provides general security advice for device operation, plant evaluation, and network isolation.
Details firmware updates, advisories, protocol activation, and access control list usage.
Lists the maximum number of configurable functions for system, interfaces, layer 2, layer 3, and security.
Shows the availability of physical/logical interfaces and system functions across different device models.
Covers access management through user settings, authentication methods (local/RADIUS), and roles.
Compares essential differences between IPv4 and IPv6 addressing, including configuration and format.
Explains the structure of an IPv4 address, subnet masks, CIDR notation, and network gateways.
Describes how Web Based Management (WBM) works, including browser requirements and secure connections.
Details the process of establishing a connection and logging into the Web Based Management interface.
Introduces the wizard for guided configuration of important parameters, including basic settings.
Explains how to update device firmware using HTTP, TFTP, and SFTP protocols via WBM.
Covers installing device configurations and firmware using a PRESET-PLUG for multiple devices.
Details methods for resetting device parameters to factory defaults using the reset button or Primary Setup Tool.
Addresses issues with firmware updates and provides solutions using TFTP and Primary Setup Tool.
Explains causes of disrupted communication due to excessive received power and offers solutions.
Lists available MIB files for SCALANCE W devices, including Root OID and Reference.
Provides a catalog of alarm and message types recorded in the event log during system startup and status changes.
Lists messages related to WLAN authentication, including successful logins and failures in access point and client modes.
Describes the structure and components of Syslog messages according to RFC 5424.
Details the parameters that can be included in Syslog messages, such as IP address, MAC address, and protocol.
Provides examples of selected Syslog messages for identification, user account management, and failed login attempts.
