Parameter Description Possible values or example
channel Name of the channel
Format: %s
12
signal strength Signal strength
Format: %d
12
version Name of the version
without spaces
Format: %s
V1.0.3SP1
length Length of the network packet (in bytes)
Format: %d
52
network interface Symbolic name of a network interface
Format: %s
vlan 1
E.3 Syslog messages
This section describes selected Syslog messages. The selection is based on IEC 62443-3-3.
This means you can integrate these events into a central monitoring system (SIEM).
Identification and authentication of human users
Log text {protocol}: User {user name} logged in from {ip address}.
Standard IEC 62443-3-3 Reference: SR1.1
Description Valid login information that is specified during remote login.
Example WBM: User admin logged in from 192.168.0.1.
Severity Info
Facility local0
Log text {protocol}: Default user {user name} logged in from {ip address}.
Standard IEC 62443-3-3 Reference: n/a (NERC-CIP 007-R5)
Description User logged in with default user name and password.
Example SSH: Default user admin logged in from 192.168.0.1.
Severity Info
Facility local0
Log text {protocol}: User {user name} logged out from {ip address}.
Standard IEC 62443-3-3 Reference: SR1.1
Description User session completed - logged out.
Example SSH: User admin logged out from 192.168.0.1.
Severity Info
Facility local0
Appendix E
E.3 Syslog messages
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 357
To Next Page
Loading...
Need help?
General
