● Prefix Length
Shows the prefix length.
● Gateway
Shows the IPv6 address of the next gateway.
● Interface
Shows the Interface of the route.
● Administrative Distance
Enter the metric for the route. When creating the route, "not used" is entered automatically.
The metric corresponds to the quality of a connection, based for example on speed or costs.
If there are several equal routes, the route with the lowest metric value is used.
Range of values: 1 - 254
● Status
Shows whether or not the route is active.
Steps in configuration
1. Enter the prefix length.
2. Enter the IPv6 address of the gateway.
3. Select the required interface.
4. Enter the metric of the route.
5. Click the "Create" button. A new entry is generated in the table.
6. Click the "Set Values" button.
6.10 "Security" menu
6.10.1 Users
6.10.1.1 Local Users
Local users
On this page, you create local users with the corresponding rights.
Configuring with Web Based Management
6.10 "Security" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 293
To Next Page
Loading...
Need help?
General
