Access point mode Client devices
Access points in client mode
Security WLAN Basic ✓ ✓
AP Communication ✓ -
AP RADIUS Authenticator ✓ -
Client RADIUS Supplicant - ✓
802.11r ✓ -
Keys ✓ ✓
Inter AP
Blocking
Basic ✓ -
Allowed Addresses ✓ -
iFeatures iPRP
1)
✓ ✓
1)
Only with CLP iFeatures, see section "Configuration License PLUG (CLP)".
Support of IPv6
The following system functions do not support IPv6 addresses:
● Inter AP blocking
● Force roaming
4.3 EtherNet/IP
EtherNet/IP
EtherNet/IP (Ethernet/Industrial Protocol) is an open industry standard for industrial real-time
Ethernet based on TCP/IP and UDP/IP. With EtherNet/IP, Ethernet is expanded by the
Common Industrial Protocol (CIP) at the application layer. In EtherNet/IP, the lower layers of
the OSI reference model are adopted by Ethernet with the physical, network and transport
functions.
You configure EtherNet/IP in "System > EtherNet/IP (Page 209)".
Common Industrial Protocol
The Common Industrial Protocol (CIP) is an application protocol for automation that supports
transition of the field buses in Industrial Ethernet and in IP networks. This industry protocol is
used by field buses/industrial networks such as DeviceNet, ControlNet and EtherNet/IP at the
application layer as an interface between the deterministic fieldbus world and the automation
application (controller, I/O, HMI, OPC, ...). The CIP is located above the transport layer and
expands the pure transport services with communications services for automation engineering.
These include services for cyclic, time-critical and event-controlled data traffic. CIP
distinguishes between time-critical I/O messages (implicit messages) and individual query/
response frames for configuration and data acquisition (explicit messages). CIP is object-
oriented; all data "visible" from the outside is accessible in the form of objects. CIP has a
common configuration basis: EDS (Electronic Data Sheet).
Technical basics
4.3 EtherNet/IP
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
36 Configuration Manual, 11/2019, C79000-G8976-C485-03
To Next Page
Loading...
