The tables of the frequency bands have the following columns:
● Radio
Shows the available WLAN interfaces.
● Radio Mode
Shows the operating mode of the device.
● Channel number
To specify the valid channels for the required frequency band, select the appropriate check
box for the channel number.
The table displays the permitted channels of the country. Only the valid channels can be
enabled. Invalid channels are grayed out and cannot be enabled.
Note
To specify the channels, the setting "Use Allowed Channels only" must be enabled.
6.3.1.10 Security settings
Introduction
To make the network secure, authentication and encryption are used. You specify the security
levels with the type of authentication and the encryption procedure.
Use WPA2/AES to prevent password misuse. WPA2 (RADIUS)/ WPA2-PSK with AES
provides the greatest security.
The security settings on both devices must match to allow a client to communicate with an
access point.
Configuring with Web Based Management
6.3 "Wizard" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 77
To Next Page
Loading...
Need help?
General
