6.5.8.2 Severity Filters
On this page, you configure the severity for the sending of system event notifications.
Description
The table has the following columns:
● Client Type
Select the client type for which you want to make settings:
– E-mail
Sending system event messages by e-mail
– Log Table
Entry of system events in the log table
– Syslog
Entry of system events in the Syslog file
– WLAN Authentication Log
Entry of system events in the WLAN authentication log
● Severity
Select the required level. The following settings are possible:
– Critical
System events are processed as of the severity level "Critical".
– Warning
System events are processed as of the severity level "Warning".
– Info
System events are processed as of the severity level "Info".
Procedure
Follow the steps below to configure the required level:
1. Select the required values from the drop-down lists of the second table column after the
client types.
2. Click the "Set Values" button.
Configuring with Web Based Management
6.5 "System" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 169
To Next Page
Loading...
