● Type of notification
– E-mail
The device sends an e-mail. This is only possible if the SMTP server is set up and the
"SMTP Client" function is enabled.
– Trap
The device sends an SNMP trap. This is only possible if "SNMPv1 Traps" is enabled in
"System > Configuration".
– Log Table
The device writes an entry to the event log table. The content of the event log table is
displayed in "Information > Log Tables > Event Log".
– Syslog
The device writes an entry to the system log server. This is only possible if the system log
server is set up and the "Syslog Client" function is enabled.
– Error
The device triggers an error. The error LED lights up and the currently pending error is
displayed under "Information > Faults".
Procedure
Follow the steps below to change entries:
1. Select the check box in the row of the required event. Select the event in the column under
the following actions:
– E-mail
– Trap
– Log table
– Syslog
– Error
2. Click the "Set Values" button.
Configuring with Web Based Management
6.5 "System" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
168 Configuration Manual, 11/2019, C79000-G8976-C485-03
To Next Page
Loading...
Need help?
General
