● MAC Address
Shows the MAC address of the virtual access point.
● SSID
Shows the SSID.
● PMF
Shows whether the management frames are cryptographically protected.
– disabled
The management frames are not encrypted.
– required
The management frames are always encrypted. A connection of the WLAN clients to the
access point is only possible when these also support PMF.
– optional
The management frames are encrypted or unencrypted depending on support of the
WLAN client.
● Security
Shows which authentication method is used.
If the authentication method "Open System + Encryption" or "Shared Key" is used,
"Encrypted (WEP/AES)" is displayed for both authentication methods.
● State
Shows the status of the WLAN interface.
– enabled
The WLAN interface is enabled.
– disabled
The WLAN interface is disabled.
6.4.16.2 Overview Client
Overview of the configuration
Note
This page is only available for clients or access points in client mode.
The page shows an overview of the existing clients and their configuration.
Configuring with Web Based Management
6.4 "Information" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
120 Configuration Manual, 11/2019, C79000-G8976-C485-03
To Next Page
Loading...
Need help?
General
