Description
● Radio
Shows the available WLAN interfaces.
● WLAN Mode
Shows the transmission standard.
● MAC Mode
Shows how the MAC address is assigned to the interface.
– Auto Layer 2 Tunnel
The client uses either MAC mode "Own" or "Layer 2 Tunnel".
– Manual
The address was entered manually.
– Own
The client uses the MAC address of the Ethernet interface for the WLAN interface.
– Layer 2 Tunnel
The client uses the MAC address of the Ethernet interface for the WLAN interface. The
network is also informed of the MAC addresses connected to the Ethernet interface of
the client. Up to eight MAC addresses can be used.
● MAC Address
Shows the MAC address of the WLAN interface.
● Operational channel
Shows the channel including frequency of the access point to which the client is connected.
At 80 MHz the channel range is displayed additionally.
Configuring with Web Based Management
6.4 "Information" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 121
To Next Page
Loading...
Need help?
General
