6.10.5 Management ACL
Description of configuration
On this page, you can increase the security of your device. To specify which station with which
IP address is allowed to access your device, configure the IP address or an entire address
range.
You can select the protocols and the ports of the station with which it is allowed to access the
device. You define the VLAN in which the station may be located. This ensures that only certain
stations within a VLAN have access to the device.
Note
If you enable this function, note the following
A bad configuration on the "Management Access Control List" page can result in you being
unable to access the device. You should therefore configure an access rule that allows access
to the management before you enable the function.
Configuring with Web Based Management
6.10 "Security" menu
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03 323
To Next Page
Loading...
Need help?
General
