Siemens SIMATIC NET SCALANCE W700 User Manual

Configuring with Web Based Management
6.3 "Wizard" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
111
●
Authentication Type
Select the type of authentication.
Note
WLAN mode IEEE 802.11 n
With devices
operated in WLAN mode IEEE8002.11n only WPA2 (WPA2-PSK and
WPA2 Radius) encryption is possible.
– Open System
Without authentication
–
WEP
– WPA-PSK
WPA authentication with WPA key. Enter the WPA key in ""WPA(2) Pass Phrase.
– WPA (RADIUS)
WPA authentication with RADIUS server. You configure the access data on the next
Basic Wizard page.
– WPA2-PSK
WPA2 authentication with WPA2 key. Enter the WPA2 key in ""WPA(2) Pass Phrase.
– WPA2 (RADIUS)
WPA2 authentication with RADIUS server. You configure the access data on the next
Basic Wizard page.
– iPCF authentication
This authentication type is shown when iPCF, iPCF-HT or iPCF-MC mode is enabled
at the corresponding WLAN interface.
You can enable iPCF authentication in the "iFeatures (Page 404)" menu.
●
Cipher
Select the encryption method.
– AUTO
AES or TKIP is used depending on the capability of the other station.
– TKIP (Temporal Key Integrity Protocol)
A symmetrical encryption method with the RC4 algorithm (Ron’s Code 4). In contrast
to the weak WEP encryption, TKIP uses changing keys derived from a main key. TKIP
can also recognize corrupted data frames.
– AES (Advanced Encryption Standard)
Strong symmetrical block encryption method based on the Rijndael algorithm that
further improves the functions of TKIP.

Siemens SIMATIC NET SCALANCE W700 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W700
Category	Wireless Access Point
Language	English