Configuring with Web Based Management
6.3 "Wizard" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
110 Configuration Manual, 08/2018, C79000-G8976-C267-13
Security Settings
Introduction
To make the network secure, authentication and encryption are used. You specify the
security levels with the type of authentication and the encryption procedure.
Use WPA2/AES, to prevent misuse of a password WPA2 (RADIUS) / WPA2-PSK with AES
provides the greatest security. You will find further information on security in the
configuration manual under "Instructions for secure network design".
The security settings on both devices must match to allow a client to communicate with an
access point.
Note
This page has different columns in access point and in client mode.
This table contains the following columns:
●
(only in Access Point mode)
Shows the interface to which the settings relate.
●
(in client mode only)
Shows the security context to which the settings relate.
To Next Page
Loading...
Need help?
General
