Siemens SIMATIC S7-1500 CPU 1511-1 PN

CPU 1511-1 PN (6ES7511-1AL03-0AB0)
Equipment Manual, 11/2022, A5E40869673-AC
38
Technical specifications
6
The following table shows the technical specifications as of 11/2022. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7511-1AL03-0AB0/td?dl=en).
Article number 6ES7511-1AL03-0AB0
General information 
Product type designation CPU 1511-1 PN
HW functional status FS01
Firmware version V3.0
Product function 
•
I&M data Yes; I&M0 to I&M3
•
Isochronous mode Yes; Distributed and central; with minimum OB
6x cycle of 500 µs (distributed) and 1 ms (cent
ral)
Engineering with 
•
STEP 7 TIA Portal configurable/integrated
from version
V18 (FW V3.0); with older TIA Portal versions con
figurable as 6ES7511-1AK02-0AB0
Configuration control 
via dataset Yes
Display 
Screen diagonal [cm] 3.45cm
Control elements 
Number of keys 8
Mode buttons 2
Supply voltage 
Rated value (DC) 24V
permissible range, lower limit (DC) 19.2V
permissible range, upper limit (DC) 28.8V
Reverse polarity protection Yes
Mains buffering 
•
Mains/voltage failure stored energy time 5ms
•
Repeat rate, min. 1/s
Input current 
Current consumption (rated value) 0.73A
Current consumption, max. 0.9A
Inrush current, max. 1.15A; Rated value
I²t 0.5A²·s
Power 
Infeed power to the backplane bus 10W