Siemens Simatic S7-300 Getting Started

SIMATIC S7-300 SIMATIC S7-300 SM331;AI 8x12 Bit Getting Started Part 2: Voltage and PT100
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
_
_____________
Preface
1
Prerequisites
2
Task
3
Mechanical setup of the
example station
4
Electric connection
5
Configuration of the
SIMATIC Manager
6
Testing the user program
7
Diagnostic interrupt
8
Hardware interrupt
9
Appendix
A
SIMATIC
S7-300
SM331;AI 8x12 Bit Getting Started
Part 2: Voltage and PT100
Getting Started
11/2006
A5E00264161-02

Siemens Simatic S7-300 Specifications

General

Memory	Depends on CPU model (e.g., 64 KB to 8 MB)
Interfaces	MPI, PROFIBUS DP, Ethernet
Power Supply	24 V DC or 120/230V AC (model-dependent)
Programming	STEP 7 (Classic) programming software using LAD (Ladder Diagram), FBD (Function Block Diagram), STL (Statement List), and SCL (Structured Control Language).
Modules	Digital/Analog I/O, Communication, Function, Power Supply
Mounting	DIN rail mounting
Operating Temperature	0°C to 60°C