Siemens SIMATIC S7-CPs - Page 11

2 Requirements for Use
B−11
CP 443-1 for Industrial Ethernet / Manual Part B
Release 07/2010
C79000-G8976-C223−06
Table of compatible CPUs
The CP is supported by the S7-400 CPUs with the order numbers and firmware
versions as shown in the following table.
The table also contains the following information:
S The number of CPs that can be operated with one CPU
S The number of CPU resources for SEND/RECEIVE calls;
S Which CPUs support the LOCK/UNLOCK function with the FETCH/WRITE
services
S Which CPU supports operation of the CP as PROFINET IO controller;
Table 2-1 CPU data relevant to use of the CP
CPU
Order number of
th CPU
as of firmware version
the CPU:
6ES7...
Multiprocessing possible
6ES7
...
Max. number of CPs
CPU resources for
SEND-/RECEIVE jobs
1)
LOCK/UNLOCK
PROFINET IO
4)
CPU 412−1 ..412−1XF04−0AB0 V4.1 +
2)
14 24 + −
CPU 412−1 ..412−1XJ05−0AB0 as of
V5.1
+
2)
14 24 + +
CPU 412-2 ..412−2XG04−0AB0 V4.1 +
2)
14 24 + −
CPU 412-2 ..412−2XJ05−0AB0 as of
V5.1
+
2)
14 24 + +
CPU 414-2 ..414−2XK05−0AB0 as of
V5.1
+
2)
14 24 + +
CPU 414-3 ..414−3XJ04−0AB0 V4.1 +
2)
14 24 + −
CPU 414-3 ..414−3XM05−0AB0 as of
V5.1
+
2)
14 24 + +
CPU 414-3 PN/DP ..414−3EM05−0AB0 as of
V5.1
+ 14 24 + +
CPU 416-2 ..416−2XK04−0AB0 V4.1 +
2)
14 64 + −
CPU 416-2 ..416−2XN05−0AB0 as of
V5.1
+
2)
14 64 + +
CPU 416F−2 ..416−2FK04−0AB0 V4.1 +
2)
14 64 + −
CPU 416F−2 ..416−2FN05−0AB0 as of
V5.1
+
2)
14 64 + +
CPU 416-3 ..416−3XL04−0AB0 V4.1 +
2)
14 64 + −
CPU 416-3 ..416−3XR05−0AB0 as of
V5.1
+
2)
14 64 + +