Siemens Simatic S7 Series

57
Review 5
1. CPU ________ has two analog inputs and one analog
output on-board.
2. Three types of SIMATIC timers available in the S7-200
instruction set are _____________, _____________, and
_____________.
3. The maximum time value for a 100 millisecond time
base timer is ____________ seconds.
4. Which SIMATIC Timer requires a Reset instruction?
5. Three types of IEC 1131-3 timers available in the S7-200
instruction set are _____________, _____________, and
_____________.
www.siemenssupply.com