The basics of counting, measurement and position detection
2.2 Basics of counting, measuring and position input (TM Count, TM PosInput, Compact CPU)
Counting, measurement and position detection
Function Manual, 12/2017, A5E32009889-AG
29
Counter behavior at gate start
You have the following configuration options for counter behavior upon gate start:
● Setting counter to start value
● Continuing with the current counter value
Setting counter to start value
Counter behavior is as follows for this configuration:
Each counting process starts with the start value when the internal gate is opened.
The figure below shows an example for continuing the counting process after counter is set
to the start value:
Continuing with the current counter value
Counter behavior is as follows for this configuration:
Each counting process starts from the current counter value after the internal gate is
reopened.
The figure below shows an example for continuing the counting process with the current
counter value:
To Next Page
Loading...
