Need help?Do you have a question about the Siemens SIMOREG DC Master 6RA7028-6DS22 and is the answer not in the manual?
General| Type | DC Drive |
|---|---|
| Model Number | 6RA7028-6DS22 |
| Communication Interface | PROFIBUS DP |
| Enclosure Rating | IP20 |
| Cooling Type | Air-cooled |
| Protection Features | Overcurrent, overtemperature, undervoltage, short circuit |
| Ambient Temperature | 0 to 40 °C |
| Relative Humidity | 95% non-condensing |
Defines the code letters for the converter order number according to MLFB guidelines.
Provides detailed technical specifications for converters, including load cycles.
Guidance on installing drives for proper electromagnetic compatibility.
Details the circuit diagram and procedure for connecting converters in parallel.
Describes the electrical connections for the power section of the converters.
Crucial safety instructions and definitions before starting up the converter.
Explains the process of changing setting values via the operator panel.
Step-by-step guide for the initial start-up of the converter.
Details the OFF2 and OFF3 signals and the switch-on/shutdown control word.
Details the switch and pushbutton operations for safety shutdown.
Explains the I2t monitoring function for motor overload protection.
Protects the DC motor commutator and brushes at high speeds.
Describes how faults are displayed and the system's response to them.
Provides a detailed list of fault causes and further information.
Details parameters for controlling the converter's operation.
Parameters related to speed controller settings.
Lists all available connectors, their descriptions, normalization, and function diagrams.
Step-by-step instructions for updating the converter software.
Instructions for replacing components such as fans and PCBs.
Describes the connection method between the SIMOREG converter and a PC.
To Next Page