Description
2.1 Which motors have encoders that can be replaced?
Replacing an encoder for SIMOTICS S-1FK7 G2, S-1FG1 and S-1FT7
18 Service Manual, 01/2018, A5E34676237B AC
Data about the encoder type
Identifying 1FK7, 2nd generation: The 8th position of the Article No. is a 2, 3 or 4
Note
1FK7 motors with a number other than 2, 3 or 4 at the 8th position of the Article No. are not
2nd generation 1FK7 motors. For these motors, you cannot repl
You must either replace the complete motor or have the motor and encoder repaired.
To Next Page
Loading...
