Need help?Do you have a question about the Siemens SIMOTICS SD and is the answer not in the manual?
General| Product brand name | SIEMENS |
|---|---|
| Product designation | SIMOTICS SD |
| Frequency | 50Hz / 60Hz |
| Insulation class | F |
| Altitude | Up to 1000 m above sea level |
| Number of poles | 2, 4, 6, 8 |
| Degree of protection | IP55 |
| Cooling Method | IC411 |
| Mounting type | IM B3, IM B5, IM B35, IM V1 |
| Terminal box position | Top |
| Efficiency Class | IE2, IE3, IE4 |
Covers manual content, target audience, and safety notices.
Information on online support, technical assistance, training, and spare parts.
Details intended use, misuse, and electromagnetic compatibility.
Responsibilities for plant personnel regarding safe operation.
Outlines the five crucial safety rules for electrical work.
Defines requirements for personnel performing work on the machine.
Precautions for live parts, rotating parts, hot surfaces, chemicals, and noise.
Addresses electromagnetic fields, ESD, and interference voltages.
Use of motors in industrial drives, line operation, and with frequency converters.
Explains identification data and technical specifications on the rating plate.
Covers machine design, regulations, cooling methods, and environmental conditions.
Guidelines for safe transport, storage, and handling of the machine.
Procedures for securing the rotor and commissioning after storage.
Ensuring adequate cooling and operating with converters.
Safety instructions and requirements for machine installation.
Procedures for measuring insulation resistance and polarization index.
Measures for aligning, fixing, and mounting the machine.
Procedures for mounting couplings, pulleys, and other output elements.
Safety instructions and hazard warnings for electrical connections.
Procedures for selecting cables, terminal box, and wiring.
Guidelines for grounding conductors and connecting wires.
Instructions for connecting converters and aluminum conductors.
Essential checks before starting the commissioning process.
Checks for converter operation and separately driven fan.
Procedures for switching on the machine and performing a test run.
Safety guidelines for operation, including rotating parts and live components.
Procedures for switching on, deactivating, stoppages, and fault diagnosis.
Identifying and resolving electrical, mechanical, bearing, and fan faults.
Safety, preparation, and inspection procedures for maintenance.
Guidelines for maintenance intervals, re-greasing, and cleaning.
Procedures for rolling bearing replacement and fan servicing.
Procedures for ordering and finding spare parts online.
Visual diagrams of machine components for parts identification.
Guidelines for disassembly, component disposal, and environmental regulations.
Tables specifying tightening torques for various connections.
Access to quality documentation for SIMOTICS products.
To Next Page