Spare parts
10
10.1 Parts order
In addition to the exact part designation, please specify the machine type and the serial number
of the machine in all orders for spare parts and repair parts. Ensure that the part designation is
the same as that in the parts list, and make sure you also use the associated part number.
When spare and repair parts are ordered, the following details must be provided:
• Designation and part number
• Order number and serial number of the machine
The machine type and serial number can be found on the rating plate.
Note
The graphical representations in this chapter show schematic diagrams of the basic versions.
They are used for spare parts denitions. The supplied version may dier in details from these
representations.
Data matrix code
A data matrix code may be provided on machines manufactured in Europe. You can retrieve the
following information from the data matrix code:
• Machine type
• Serial number
• Customer material number, if ordered as option Y84
• Using the Data Matrix code and the App "SIMOTICS Digital Data", you can access the technical
data, spare parts and operating instructions for your motor.
10.2 Determining the spare parts via the Internet
You can use "Spares on Web" to determine the order numbers for motor
spare parts quickly and easily.
Spares on Web (https://www.sow.siemens.com/?lang=en)
1LE5, 1PC4 shaft heights 280 ... 355
Operating Instructions, 11/2022, A5E41454666A 115
To Next Page
Loading...
Need help?
General