General safety instructions
1.3 Industrial security
Replacing an encoder for SIMOTICS S-1FK7 G2, S-1FG1 and S-1FT7
14 Service Manual, 01/2018, A5E34676237B AC
Note
Industrial security
Siemens provides products and solutions with industrial security functions tha
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement
– and continuously maintain – a holistic, state-of-the-art industrial
ecurity concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
co
nnected to an enterprise network or the Internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
For additional information on industrial security m
easures that may be implemented, please
http://www.siemens.com/industrialsecurity)
Siemens’ products and solutions undergo continuous development to make them more
sec
ure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase custom
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed at:
http://www.siemens.com/industrialsecurity)
Further information is provided on the Internet:
Industrial Security Configuration Manual
(https://support.industry.siemens.com/cs/ww/en/view/108862708)
To Next Page
Loading...
Need help?
General