Appendices
A
A.1 Standards
IEC 1131
The SIMOTION programmable controller meets the requirements and criteria of the
Standard IEC 1131, Section 2.
CE Designation
Our products meet the general and safety-related requirements of the following EC
guidelines and conform to the uniform standards (EN) for programmable controllers
published in the official gazettes of the European Union:
89/336/EEC "Electromagnetic Compatibility" (EMC guideline)
The EU declaration of conformity is part of this manual; note the corresponding reference.
EMC guideline
SIMOTION products are designed for industrial use.
Table A-1 Electromagnetic compatibility (EMC)
Application range Requirements for
Radio interference Immunity to noise
Industry EN 61000-6-4 EN 61000-6-2 : 1999
UL approval
Recognized component mark for Canada and the United States Underwriters Laboratories
(UL) in accordance with Standard UL 508, File 16 4110
A.2 Information on insulation tests, safety class, and degree of protection
Test voltages
During the routine test, the insulation resistance is tested at the following test voltage in
accordance with IEC 1131 Part 2:
D4xx
Manual, 12.2004, 6AU1900-1AJ32-0BA0
A-1
To Next Page
Loading...
Need help?
General
