Siemens Sinteso FD20 - FDM223-Ex Call Point Technical Data

Special detectors
Manual call point FDM223
-
Ex
10
008164_y_en_-- 123 | 152
10.7.3 Technical data
FDM223-Ex
Operating voltage DC 13…28 V
Operating current (quiescent) 200 μA
Operating temperature -25…+70 °C
Storage temperature -35…+75 °C
Air humidity ≤95 % rel.
Communication protocol FDnet-Ex
Conductor cross section 1…1.5 mm
2
Color ~RAL 3000 flame red
Protection category (IEC/EN 60529)
● With seal DMZ1197-AD
IP44
IP66
Ex classification
IECEx
Directive 2014/34/EU:
(ATEX directive)
Ex ia IIC T4 Ga, Ta = -35…70 °C
Ex ia IIIB T135 °C Da , Ta = -35…70 °C
II 1 G Ex ia IIC T4 Ga, Ta = -35…70 °C
II 1 D Ex ia IIIB T135 °C Da, Ta = -35…70 °C
Standards EN 54-11 Type B (indirect activation)
Standards for explosion-hazard areas EN 60079-0
EN 60079-11
Ex approvals
● EC-type examination certificate
● IECEx
BVS 12 ATEX E 095 X
IECEx BVS 12.0082X
Approvals
● VdS
● DNV GL (marine)
G213107
MEDB00003UM
System compatibility
● FDnet
● C-NET
FS20, AlgoRex, SIGMASYS
FS720