2
008164_y_en_-- 17 | 152
Heat detector FDT241
● Optional detector dust cap to protect the point detector during the
construction phase
Function
● Two heat sensors prevent the total failure of the thermal detection capacity
of in the event of a fault affecting a sensor.
● Measures the operating temperature and the temperature inside the
detector housing so that temperature rise can be detected.
● Selectable detection behavior thanks to application-specific ASA parameter
sets
Use
● For monitoring rooms in which rapid temperature rise is to be expected in
the event of a fire or if optical detection is difficult
● Can be used addressed
Dummy detector FDX291
Use
● To cover bases that are left empty for prolonged periods of time
2.3.2 Type Overview
Type Designation Order no. Weight [kg]
Point detector
FDOOT241-9 Multi-sensor smoke detector A5Q00004813 0.106
FDOOT241-A Multi-sensor smoke detector S54310-F13-A1 0.106
FDO241 Smoke detector A5Q00004811 0.103
FDT241 Heat detector A5Q00004812 0.086
Base adapter
FDB241 Base adapter Sinteso (SIGMA/A+) S54319-F13-A1 0.086
FDB251 Base adapter Sinteso (Interactive) S54319-F28-A1 0.090
FDB281 Base adapter MS8/PMT A5Q00004929 0.125
FDB299 Base adapter Sinteso (AlgoRex coll.) S54319-F14-A1 0.086
Other accessories
FDUD290 Removal tool for adapter S54370-S13-A1 0.098
FDX291 Dummy detector S54319-F2-A1 0.120
FDOOT241-9M Migration kit A5Q00015955 0.140
To Next Page
Loading...
