HMI alarms
11/2006 Overview of Alarms
2-623
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
101143 MDx142 FIELD_WEAKENING_SPEED = 0
Definitions: --
Remedy: --
101144 MDx118 MOTOR_STANDSTILL_CURRENT = 0
Definitions: --
Remedy: --
101145 MD1104/1118
MOTOR_MAX_CURRENT/MOTOR_STANDSTILL_CURRENT > 900.0
Definitions: --
Remedy: --
101146 Boot file(s) saved
Definitions: Saving the boot file in the start-up area, image drive machine data, was successful.
Remedy: --
101147 Boot file(s) deleted
Definitions: Deleting the boot file in the start-up area, image drive machine data, was successful.
Remedy: --
101148 Controller MD calculated
Definitions: Calculating the controller data in the start-up area, image drive machine data, was successful.
Remedy: --
101149 Display MD accepted
Definitions: --
Remedy: --
101150 MD set to active
Definitions: Activation of the machine data in the start-up area, machine data images, was successful.
Remedy: --
101151 Start-up successful
Definitions: In the start-up area, image NC start-up, one of the three functions
- normal booting
- booting with default values
- start of the software update
was successfully initiated.
Remedy: --
101152 Error during communication with NCK
Definitions: --
Remedy: --
To Next Page
Loading...
