HMI alarms
11/2006 Overview of Alarms
2-625
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
101163 MDx130 MOTOR_NOMINAL_POWER <= 0
Definitions: --
Remedy: --
101164 MDx132 MOTOR_NOMINAL_VOLTAGE <= 0
Definitions: --
Remedy: --
101165 MDx103 MOTOR_NOMINAL_CURRENT <= 0
Definitions: --
Remedy: --
101166 MDx129 POWER_FACTOR_COS_PHI illegal
Definitions: --
Remedy: --
101167 MDx134/MDx400
MOTOR_NOMINAL_FREQUENCY/MOTOR_RATED_SPEED illeg.
Definitions: --
Remedy: --
101168 Warning MDx142 FIELD_WEAKENING_SPEED<MDx400
MOTOR_RATED_SPEED
Definitions: --
Remedy: --
101169 Date and time could not be set!
Definitions: --
Remedy: --
101200 Safety Integrated data copied
Definitions: The SI data copying function was successfull.
Remedy: --
101201 Safety Integrated data confirmed
Definitions: The SI data confirmation function was successfull.
Remedy: --
101202 Copying SI data from axis %1 to drive %2
Parameters: %1 = Axis name
%2 = Drive number
Definitions: This message is output during the SI data copying function.
Remedy: --
101203 SI data not copied completely
Definitions: An error occurred during the SI data copying function; this caused the SI data to be copied
incompletely or not at all.
Remedy: --
To Next Page
Loading...
