HMI alarms
11/2006 Overview of Alarms
2-627
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
101214 Initialization of this window unsuccessful!
Definitions: An attempt was made to select the image of the NCK address in the start-up area.
An error occured while determining the nodes on the bus.
Due to inconsistent data, this image cannot be displayed.
Remedy: --
101300 Please wait - Language being changed
Definitions: In the start-up area the softkey "Change language" was pressed.
The screen content is being restructured.
Remedy: --
101301 Versions saved -> output via %1
Parameters: %1 = --
Definitions: --
Remedy: --
101310 Error in %1: line %2: error in XML structure
Definitions: --
Remedy: Correct the error in the indicated line.
101311 Error in %1: line %2: path not found !
Definitions: --
Remedy: Correct the indicated line of the path.
101312 Error in %1: line %2: path incorrect !
Definitions: --
Remedy: Correct the indicated line of the path.
101400 License key set.
Definitions: --
Remedy: --
101401 License key NOT sufficient.
Definitions: --
Remedy: --
101402 Error on writing back the options.
Definitions: --
Remedy: --
101403 Please wait - licence screen is being prepared. (%1)
Parameters: %1 = --
Definitions: --
Remedy: --
101500 No other drives possible; option not set.
Definitions: --
Remedy: --
To Next Page
Loading...
