Siemens SINUMERIK 810D - Page 669

HMI alarms
11/2006 Overview of Alarms
2-669
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
112562 USB device no longer available, editing is%naborted. The last changes
are lost.
Definitions: --
Reaction: Alarm display.
Remedy: --
112563 USB device not available; program editing is%nbeing interrupted; last
changes are lost.
Definitions: --
Reaction: Alarm display.
Remedy: --
112564 USB device no longer available,%ncopying was aborted.
Definitions: --
Reaction: Alarm display.
Remedy: --
112565 USB device no longer available.
Definitions: --
Reaction: Alarm display.
Remedy: --
112600 Spindle not synchronized
Definitions:
Reaction: Alarm display.
Remedy: Synchronize the spindle.
Program
Continuation:
Internal
112601 ShopTurn: %1
Definitions: A system error has occurred.
Reaction: Alarm display.
Remedy: Please contact the hotline of Siemens AG, A&D MC and provide with the error message.
Program
Continuation:
Clear alarm with the Delete key or NC START.
112604 Connection to the PLC broken off
Definitions: Acknowledgement to the PLC user program, that the connection with the PCU has been broken off.
ShopMill PLC is terminated.
Reaction: Alarm display.
Remedy: Check the PLC user program.
Program
Continuation:
Internal
112605 Asynchronous subprogram was%nnot executed
Definitions: The input values could not be correctly processed by the NC.
Reaction: Alarm display.
Remedy: Perform an NCK reset
Program
Continuation:
Internal