Siemens SINUMERIK 810D - Page 671

HMI alarms
11/2006 Overview of Alarms
2-671
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
113005 Incorrect NC file positioning: %1
Parameters: %1 = --
Definitions: --
Remedy: --
113006 NC program is not open %1
Parameters: %1 = --
Definitions: --
Remedy: --
113007 Cannot read NC block, no.: %1
Parameters: %1 = --
Definitions: --
Remedy: --
113008 NC block cannot be written, no.: %1
Parameters: %1 = --
Definitions: --
Remedy: --
113009 File name missing for copy
Definitions: --
Remedy: --
113010 Cannot open file: %1
Parameters: %1 = --
Definitions: --
Remedy: --
113011 Cannot write file: %1
Parameters: %1 = --
Definitions: --
Remedy: --
113012 Cannt write NC file: %1
Parameters: %1 = --
Definitions: --
Remedy: --
113013 Cannot read NC file: %1
Parameters: %1 = --
Definitions: --
Remedy: --
113014 Invalid NC file name: %1
Parameters: %1 = --
Definitions: --
Remedy: --