Motion synchronous actions
10.5 Technology cycles
Job planning
10-76 Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
Example
Lock synchronized actions, LOCK
N100 ID=1 WHENEVER $A_IN[1]==1 DO M130
...
N200 ID=2 WHENEVER $A_IN[2]==1 DO LOCK(1)
Unlock synchronized actions, UNLOCK
N100 ID=1 WHENEVER $A_IN[1]==1 DO M130
...
N200 ID=2 WHENEVER $A_IN[2]==1 DO LOCK(1)
...
N250 ID=3 WHENEVER $A_IN[3]==1 DO UNLOCK(1)
Interrupt technology cycle, RESET
N100 ID=1 WHENEVER $A_IN[1]==1 DO M130
...
N200 ID=2 WHENEVER $A_IN[2]==1 DO RESET(1)
To Next Page
Loading...
Need help?
General
