Siemens SINUMERIK 840D Diagnostic Manual

Overview of Alarms 11/2006
HMI alarms
2-616
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
100550 Error TA: Syntax error in %1 in line %2
Parameters: %1 = --
%2 = --
Definitions: --
Remedy: --
100555 Error TA: Branch point not found in %1
Parameters: %1 = --
Definitions: --
Remedy: --
100560 Automatic test machine started
Definitions: --
Remedy: --
100565 Automatic test machine stopped
Definitions: --
Remedy: --
100570 Error TA: %1 not found
Parameters: %1 = --
Definitions: --
Remedy: --
100600 Error on trying to read text file %1
Parameters: %1 = --
Definitions: --
Remedy: --
100620 Error on trying to open font file %1
Parameters: %1 = --
Definitions: --
Remedy: --
100648 The selected language was not installed without error
Definitions: --
Remedy: --
100649 MMC0_TXV.INI file not found
Definitions: --
Remedy: --
100650 No NC/PLC found! NC/PLC being simulated!
Definitions: --
Remedy: --
100651 Network driver error!
Definitions: --
Remedy: --

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB