Siemens SINUMERIK 840D Diagnostic Manual

PLC alarms
11/2006 Overview of Alarms
2-829
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
800000 Error: HiGraph group no. %A graph no. %N status %Z
Definitions: -
Reaction: Alarm display.
Remedy: -
Program
Continuation:
Internal
810001 Error OB event, error analysis via STEP7 required
Definitions: Reduced PLC error message. STEP7 is required for exact analysis.
Reaction: Alarm display.
Remedy: Diagnose with STEP7.
Program
Continuation:
Internal
810002 Synchronous error, error analysis via STEP7 required
Definitions: Reduced PLC error message. STEP7 is required for exact analysis.
Reaction: Alarm display.
Remedy: Diagnose with STEP7.
Program
Continuation:
Internal
810003 Asynchronous error, error analysis via STEP7 required
Definitions: Reduced PLC error message. STEP7 is required for exact analysis.
Reaction: Alarm display.
Remedy: Diagnose with STEP7.
Program
Continuation:
Internal
810004 Stop/abort event, error analysis via STEP7 required
Definitions: Reduced PLC error message. STEP7 is required for exact analysis.
Reaction: Alarm display.
Remedy: Diagnose with STEP7.
Program
Continuation:
Internal
810005 Operational state sequence event, error analysis via STEP7 required
Definitions: Reduced PLC error message. STEP7 is required for exact analysis.
Reaction: Alarm display.
Remedy: Diagnose with STEP7.
Program
Continuation:
Internal
810006 Error communication event, error analysis via STEP7 required
Definitions: Reduced PLC error message. STEP7 is required for exact analysis.
Reaction: Alarm display.
Remedy: Diagnose with STEP7.
Program
Continuation:
Internal

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB