This document was produced for training purposes.
Siemens assumes no responsibility for its contents.
840D/828D SINUMERIK Operate
840D/828D SINUMERIK Operate
Operating mode “MDA“
B521
1 Brief description
Aim of the module:
Working through this module you become familiar with the different options of the operating mode
“MDA” in the operating area “Machine“.
Description of the module:
This module describes how a program can be loaded directly from the program manager into the
MDA-buffer and how the processing of the program is started.
It will be explained how an edited program, created in the working window, is written from the MDA-
buffer to any directory on the control unit.
You learn how to create a directory and a workpiece file of the type *.WPD (workpiece directory.
Furthermore the functions “Program control” and “Handwheel” will be explained.
To Next Page
