To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIPART PS2 6DR5110 Series and is the answer not in the manual?
General| Product type | Valve Positioner |
|---|---|
| Series | SIPART PS2 |
| Input Signal | 4 to 20 mA |
| Output Signal | Pneumatic |
| Power supply | 24 V DC |
| Type | Electro-pneumatic positioner |
| Supply Pressure | 1.4 - 7 bar |
| Communication Protocol | HART |
| Protection Class | IP66 |
| Enclosure | Aluminum |
| Certifications | ATEX, IECEx, CSA |
| Temperature Range | -40°C to +80°C (-40 to +176 °F) depending on the version |
Explains the significance of safety symbols and warning types (Danger, Warning, Caution).
Defines personnel qualifications required for safe operation and maintenance of the instrument.
Details the use of intrinsically safe and explosion-proof versions in hazardous areas.
Explains how the positioner controls the actuator using pneumatic signals and control algorithms.
Describes the HART communication protocol for configuration and diagnostics.
Outlines the general procedure and warnings for mechanical fitting and connections.
Provides essential notes and warnings for electrical installation, especially in hazardous areas.
Details the wiring for intrinsically safe applications in hazardous areas.
Details pneumatic connections, required air quality, and safety positions on power failure.
Introduces the three methods for adapting the positioner to the actuator.
Describes the steps for automatic initialization of linear actuators.
Describes the steps for automatic initialization of rotary actuators.
Lists and describes the five operating modes of the positioner.
