Siemens SIPART PS2 series - Page 18

Electropneumatic positioners
SIPART PS2
Ordering data
SIPART PS2, PS2 PA, PS2 FF
6/18
Siemens FI 01 · 2009
6
Selection and Ordering data
Order No.
Electropneumatic positioner
SIPART PS2, Ex protection without,
EEx ia/ib and EEx n
6 D R 5
777
- 0
7 777
-
77
A
7
Version
2-wire (4 to 20 mA)
• Without HART } 0
•With HART, not explosion-protected } 1
2-, 3-, 4-wire (0/4 to 20 mA)
•With HART, explosion-protected } 2
• Without HART, not explosion-
protected
} 3
PROFIBUS PA connection } 5
FOUNDATION Fieldbus connection } 6
For actuator
Single-action } 1
Double-action } 2
Casing
Plastic } 0
Aluminum; only single-action } 1 1
Stainless steel (without window) } 2
Explosion protection
Without } N
With explosion protection EEx ia/ib
(CENELEC/ATEX/FM/CSA)
} E
With explosion protection EEx n,
(CENELEC/ATEX)
• For zone 2 and zone 22 (dust),
casing: aluminium or stainless steel;
each with no window in the cover
D
• For zone 2
1)2)
casing: aluminium or plastic; each
with window in the cover
G
Connection thread
electrical/pneumatic
M20 x 1.5 / G¼ } G
½-14 NPT / ¼-18 NPT } N
M20 x 1.5 / ¼-18 NPT M
½-14 NPT / G¼ P
With plug M12 / G¼
R
With plug M12 / ¼-18 NPT
S
Limit monitor
Installed, incl. 2nd cable gland
Without } 0
Alarm module; electronic
(6DR4004-.A)
1
SIA module; slot-type initiators
(6DR4004-.G)
2
Limit value contact module (mechani-
cal switching contacts (6DR4004-.K)
3
Optional modules
Installed, incl. 2nd cable gland
Without } 0
Iy module for position feedback
signal (4 ... 20 mA) (6DR4004-.J)
1
EMC filter module for external
position sensor (C73451-A430-D23)
2
Iy module and EMC filter module for
external position sensor
3
Customer-specific design
Without } 0
Brief instructions
German/English } A
French/Spanish/Italian B
Mounted pressure gauge block
Without } 0
Single-action G¼, scaling MPA and
bar
1
Double-action G¼, scaling MPA and
bar
2
Single-action ¼-18 NPT, scaling
MPA and psi
3
Double-action ¼-18 NPT, scaling
MPA and psi
4
Further designs Order code
Add "-Z" to Order No. and specify
Order code.
Version with stainless steel sound
absorbers
standard with stainless steel enclo-
sures
A40
Measuring point number (TAG No.)
HART tag max. 8 characters,
max. 32 characters for
PROFIBUS PA, FOUNDATION Field-
bus and 4 ... 20 mA version,
specify in plain text: Y17: ........
Y17
3)
Measuring point description
HART tag max. 16 characters,
max. 32 characters for
PROFIBUS PA, FOUNDATION Field-
bus and 4 ... 20 mA version,
specify in plain text: Y15: ........
Y15
3)
Measuring point text
HART tag max. 24 characters,
max. 32 characters for
PROFIBUS PA, FOUNDATION Field-
bus and 4 ... 20 mA version,
specify in plain text: Y16: ........
Y16
3)
TAG plate made of stainless steel,
3-line
Text line 1: Plain text from Y17
Text line 2: Plain text from Y15
Text line 3: Plain text from Y16
A20
3)
Preset bus address
Specify in plain text: Y25: ........
Y25
3)
} Available ex stock
1)
Maximum impact energy to the casing: 1 Joule.
2)
For device versions in plastic casing: it is essential to prevent electrostatic
charging. Maximum torque of the cable gland: 67 Nm.
3)
Only for plastic casing, for other casings on request.
Selection and Ordering data
Order No.
Electropneumatic positioner
SIPART PS2, Ex protection without,
EEx ia/ib and EEx n
6 D R 5
777
- 0
7 777
-
77
A
7
© Siemens AG 2008