Siemens SiPass integrated

Host event tasks
Targets / Commands
7
A6V11144326
37 | 66
Target
Command
Description
Reset Count
Resets the current count for the anti-passback
area to zero.
Override Mode
Override the selected area with a specific mode.
Restore Mode
Restores the configured Anti-Passback mode.
CCTV
Switch Camera to
Monitor
Switches the selected camera to display on the
specified monitor. Refer to the CCTV User’s
Guide for more information.
Run Pattern
Displays a pre-configured pattern on the
specified monitor. Refer to the CCTV User’s
Guide for more information.
Run Sequence
Displays a pre-configured sequence on the
specified monitor. Refer to the CCTV User’s
Guide for more information.
Run Preset
Displays a pre-configured preset on the specified
monitor. Refer to the CCTV User’s Guide for
more information.
Activate Alarm
Activates a pre-configured alarm on the specified
monitor. Refer to the CCTV User’s Guide for
more information.
Acknowledge Alarm
Displays a pre-configured alarm on the specified
monitor. Refer to the CCTV User’s Guide for
more information.
Database
Database Backup:
Data
Performs a backup of the SiPass integrated data
files.
Database Backup:
Binaries
Performs a backup of the SiPass integrated
binary files.
Database backup:
Historical
Performs a backup of the historical data.
Database Backup:
Runtime
Performs a backup of the runtime data.
Database Backup:
Full
Performs a complete SiPass integrated
Database backup.
Door
Interlocking
Disable
Disable Door Interlocking.
Restore
Restore Door Interlocking.
DVR
DVR Recording
Records the live image from the selected DVR
Camera for between 1 and 600 seconds.
Enter the desired recording time into the
Duration field in seconds.
DVR Operation
The DVR Client will appear displaying the live
image from the selected camera and preset.
DVR Camera
Positioning
Moves the selected DVR Camera to a predefined
position.
Floor point
Bank Floor secure
Secures the specified floor.
Bank Floor unsecure
Unsecures the specified floor.
Cancel permanent
action
Cancels the last command for the elevator floor
and returns its operation to the programmed
operation.