Siemens SIPROTEC 7SJ80 Product Information

7SIPROTEC 7SJ80 / 7SK80 V4.60, Product Information
E50417-K1150-C342-A6, Edition 07.2010
3 Statement of Conformity
Further
IEEE Std C37.90
This product is UL-certfied with the values as stated in the Technical Data.
file E194016
This product complies with the directive of the Council of the European
Communities on the approximation of the laws of the Member States
relating to electromagnetic compatibility (EMC Council Directive 2004/
108/EC) and concerning electrical equipment for use within specified
voltage limits (Low-voltage Directive 2006/95/EC).
This conformity has been established by means of tests conducted by
Siemens AG in accordance of the Council Directive in agreement with
the generic standards EN 61000-6-2 and EN 61000-6-4 for the EMC
directives, and with the standard EN 60255-27 for the low-voltage direc-
tive.
The device has been designed and produced for industrial use.
The product is conforming to the international standards of the series
IEC 60255 and the German regulation of VDE 0435.
NOTE concerning battery disposal
The batteries must only be replaced with the same type or a another type
recommended by the manufacturer. Improper replacement involves
explosion hazard. For disposing the batteries it is necessary to observe
the local national / international directives.

Siemens SIPROTEC 7SJ80 Specifications

General

Rated Frequency	50/60 Hz
Rated Current	1 A / 5 A
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to +70°C
Current Transformer Inputs	4
Application	Protection of feeders, motors, transformers, and generators
Rated Voltage	100-240 V AC/DC
Communication Protocols	IEC 61850, Modbus, DNP3, IEC 60870-5-103
Display	Graphical LCD
Mounting	Flush mounting
Protection Functions	Overcurrent, Earth fault
Communication Interfaces	Ethernet, RS485
Housing	Plastic
Weight	Approx. 1.5 kg