How to troubleshoot F3x101 error (zero mark failed) on Siemens DC Drives?
To troubleshoot the F3x101 error (zero mark failed), verify that the connection assignment is correct. Specifically, check if A is interchanged with –A or B is interchanged with –B.
What to do if Siemens SIROTEC DC Drives show F3x100 error (Zero mark distance error)?
If your Siemens DC Drives display the F3x100 error (Zero mark distance error), check whether the connection assignment is correct, ensuring that R is not interchanged with –R.
How to fix Siemens SIROTEC DC Drives error F3x101 (zero mark failed)?
If the F3x101 error (zero mark failed) occurs in your Siemens DC Drives, ensure that the connection assignment is correct. Specifically, check if A is interchanged with –A, or if B is interchanged with –B.
What to do if Siemens SIROTEC DC Drives show F3x100 (Zero mark distance error)?
If you are encountering the F3x100 error (Zero mark distance error) on your Siemens DC Drives, verify that the connection assignment is correct. In particular, check if R is interchanged with –R.
What to do if zero mark is too early or late on Siemens DC Drives?
If you encounter a zero mark that is too early or late, potentially due to interference pulse or pulse loss on the A/B track, use pole position adaptation or pulse number correction to resolve the issue.
How to fix EMC faults in Siemens DC Drives?
To address EMC faults, implement an adjustable hardware filter.
What to do if zero mark is too wide in Siemens SIROTEC DC Drives?
If the zero mark is too wide, use edge evaluation of the zero mark.
How to handle interjected zero mark in Siemens SIROTEC?
To handle an interjected zero mark, use zero mark tolerance.
To Next Page
General