Parameterizing the SITOP UPS1600
6.2 Switching off the UPS when the power fails by a user program
SITOP UPS1600 under STEP 7 V12
36 Getting Started,
Variable in the symbol table
Address area in the
following example
UPS_New_alarms_pending New alarms pending New / no pending
%IB 261
UPS_battery_charge_level battery_charge level Charging state of
%IB 262
Note
You can find additional information on the I/O address area of the UPS1600 in the UPS1600
Manual.
1. Under project navigation, in folder "PLC variables > UPS1600 Tag table", open the
variable table "Tag table UPS1600".
To Next Page
Loading...
