7MF1567 with cable (2 m)
● Type 7MF1567-*****-3**1
7MF1567 with fast-fit cable gland
● Type 7MF1567-*****-4**1
Device structure without explosion protection
The pressure transmitter consists of a piezo-resistive measuring cell with a diaphragm installed
in a stainless steel enclosure. It can be electrically connected using a plug complying with
EN 175301-803-A (IP65), a round plug M12 (IP67), a cable (IP67) or a fast-fit cable gland
(IP67). The output signal is between 4 and 20 mA or 0 and 10 V.
Device structure with explosion protection
The pressure transmitter consists of a piezo-resistive measuring cell with a diaphragm installed
in a stainless steel enclosure. It can be connected electrically with a connector fulfilling EN
175301-803-A (IP65) or a round plug M12 (IP67). The output signal amounts to between 4 and
20 mA.
3.3 Layout of the nameplate
Separator
Single part number
Order item
3 digits of the order number
Date in format “Year-Month-Day”
*)
Manufacturer short name
Manufacturing date is visible on the label of the pressure transmitter, e.g.:
LKK-YMDD-XXX-XX-XXX
Description
3.3 Layout of the nameplate
SITRANS P220
12 Compact Operating Instructions, 02/2019, A5E03304437-AB
To Next Page
Loading...
