EasyManua.ls Logo

Siemens SL45i - Accepting and Rejecting Calls

Siemens SL45i
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14.9.01 U35gb.fm U35 /SL45i- English, A31008-H4860-A1-1-7619
(
"
(
The phone must be switched on to
receive calls (in standby mode).
or, if call divert is set:
accept a call with:
 or with
 divert the call.
"
Press.
)

The caller hears the busy signal.
 Diverts, say, to the mailbox, if
this diversion has been set, see
p. 57.
9:;<;67=:>
( ?
( '
(
If a call comes in, the music is automatically
interrupted. Press the PTT key to accept the
call or to end the call (see p. 26).
((5*
You must have recorded and activated an
Answer.message.
When a call comes in, press the dictation
key %. The call is accepted and an
Answer.message is played without your
having to speak (see also p. 30).
The numbers of calls that have been
received and missed are stored for call
backpurposes, see p. 51.
You can also press any key to accept a call,
for the setting, see "Any key answer", p. 59.
An incoming call will interrupt any other use
of the phone.
For data calls and fax calls see p. 72.
For functions during the call
see p. 15.
Switch off the ringer for the current call:
Hold down.
The call is displayed. The caller
hears the dialling tone.

Related product manuals