Siemens SL45i - PC Software; Data Exchange Software

14.9.01 U35gb.fm U35 /SL45i- English, A31008-H4860-A1-1-7619
+
41,$
With the phone connected to a PC
(see p. 73), you can transmit and
receive faxes and data. Appropriate
software for data communication/
fax communication must be
available on your PC.
Fax and data services must be
enabled on your phone. Different
networks support different types of
fax/data reception; contact your
Service Provider for details.
05
Your Service Provider must give you
a phone number for telephoning and
a fax/data number.

Start your PC communication
program and enter the destination
phone number in the program.
#
The call is signalled by a special
ringer and its type (fax or data) is
displayed.
Now start the communication
program on your PC to receive the
fax.
$*
( ?

5/0

4$
Î

Î
0C-*5 Î
-0C
Set this function on the phone %
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up
the following soft key is available for
two seconds:
;<6 Switch to -0C
mode.
<6 Switch to fax mode; you
may now send a fax.
#
(  if a special fax number is not
available).
Start the communication program
on your PC and switch on the
function on the phone the call
(the PC accepts the connection).

Î
 
Î
0C-*5 Î
'5-0C
$
End transmission in the PC software
and/or press
.