EasyManua.ls Logo

Siemens TE 803 series - Menu Settings

Siemens TE 803 series
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
en
Menusettings
Menu settings
Holddownthejbutton7foratleast
3seconds.
Thedifferentsettingoptionsarenow
displayed.
Settings
Coffee temp.
Hot water temp. <85°C
Exit profile
Thedifferentsettingoptionscanbeselected
withtheselectionbuttons< and > 4.
Note:Thechangesyouhavemadeare
savedautomatically.Itisnotnecessary
toconfirmthemadditionally.Ifnoentryis
madeafterapprox.2minutes,themenuwill
closeautomatically.
The following settings can be selected:
Language
Turntherotaryknob6toselectthe
requiredlanguage.
Coffee temp.
Turntherotaryknob6tosetthecoffee
temperature.Thesettingappliesto
alltypesofpreparation,exceptthe
customisedsettingsunder“Customising”.
Hot water temp.
Turntherotaryknob6tosetthe
temperature.Thesettingappliesto
alltypesofpreparationexceptthe
customisedsettingsunder“Customising”.
Exit profile
Hereyoucansetwhethertheappliance
shouldexitthecustomisingfunction
automaticallyautomaticormanually
manually.
Auto off after
Turntherotaryknob6toenterthetime
spanafterwhichtheapplianceshould
automaticallyswitchofffollowingthelast
drinkpreparation.
Atimebetween5minutesand8hourscan
beset.
Cup warm. off in
(depending on the model)
Hereyoucansetthetimespanafterwhich
thecupwarmer27switchesoffagain
automatically.
Settherequiredtimebyturningtherotary
knob6.
Contrast
The display 5contrastcanbesetfrom–10
to+10.Thefactorysettingis+0.
Turntherotaryknob6toselectthe
requiredsetting.
Water hardness
Turntherotaryknob6toselectthe
requiredwaterhardness1, 2, 3 or 4.
Info: Itisimportanttosetthewater
hardnesscorrectly,sothattheappliance
indicatesaccuratelywhenthedescaling
programmeshouldberun.Thefactory
settingforthewaterhardnessis4.If a
watersoftenerisinstalledinthehouse,
pleasesetthewaterhardnesstolevel3.
Youcancheckthewaterhardnessusing
theenclosedteststriporbyaskingyour
localwatersupplier.
Diptheteststripbrieflyinwaterand
checktheresultafteroneminute.
Level Waterhardness
German(°dH) French(°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54

Table of Contents

Other manuals for Siemens TE 803 series

Related product manuals