Siemens TE 803 series - Water Filter

 13
en
 Menusettings
Water filter
Anewwaterfiltermustberinsedbeforeit
canbeused.
■ Todothis,pressthewaterfilterfirmly
intothewatertank11withtheaidofthe
measuringspoon14.Fillthewatertank
withwateruptothe“max”mark.
■ Turntherotaryknob6toselectstart
andpressthestartbutton8.
Place 1 l container
Place suction pipe in container  start
■ Placeacontainerwithacapacityof1litre
underthemilkfrother10.
■ Placetheendofthesuctionpipe10d in
thecontainer.
■ Pressthestartbutton8.Waterwillnow
flowthroughthefiltertorinseit.
■ Next,emptythecontainer.
Theapplianceisreadyforuseagain.
Info: Rinsingthefiltersimultaneously
activatesthesettingforthe“changefilter”
display.
Youcanfinddetailedinformationaboutthe
waterfilterintheenclosedfilterinstructions.
Thefilterisnolongereffectivewhenthe
Service - change filter display appears,
oratthelatestaftertwomonths.Itneedsto
bereplacedforreasonsofhygieneandso
thatthereisnobuild-upoflimescale(this
coulddamagetheappliance).
Waterfiltersareavailablefromretailoutlets
orfromcustomerservices(seethesection
“Accessories”).
Ifnonewfilterisused,turnthe
Water
filtersettingtono.
Info: Iftheappliancehasnotbeenusedfor
aprolongedperiod(forexample,whenyou
areonvacation),theexistingfiltershould
berinsedbeforetheapplianceisused
again.Todothis,simplydispenseacupof
hotwater.
Transport. lock
■ Toavoiddamagecausedbyfrostduring
transportandstorage,theappliancemust
becompletelyemptiedfirst.
Info: Theappliancemustbereadyforuse
andthewatertank11filled.
■ Pressthestartbutton8.Theappliance
automaticallyemptiesthepipesystem
andswitchesoff.
■ Emptythewatertank11andthedrip
tray23.
Factory reset
Youcancancelyourownsettingsandreset
thefactorysettings.
■ Toactivatethefactorysettings,pressthe
startbutton8.
Info:Theappliancecanalsoberesetto
thefactorysettingsusingacombinationof
buttons.Theappliancemustbeswitched
offfully.
■ Holddowntheselectionbuttons< and
> 4andtheon/offswitch1 O / Iatthe
sametimeforatleast5seconds.Press
thestartbutton8.Thefactorysettings
arenowreactivated.